NursingDrill · Guides · Dosage calculation practice

Dosage calculation practice for TEAS and HESI-style math

Most "med math" on a pre-nursing entrance exam is unit math wearing scrubs. If you can line units up so they cancel, you can solve tablet problems, liquid doses, weight-based doses and IV rates with one method. This page teaches that method, works three problems all the way through, then gives you 15 problems to try with instant feedback.

Study practice only. This is exam math practice, not a dosing reference or medical advice. Every drug amount, weight and order on this page is made up to practice arithmetic. Real doses come from a prescriber, the drug label and facility policy, never from a practice page.

This is unofficial practice. It is not official ATI TEAS or HESI material. NursingDrill is not affiliated with or endorsed by ATI or Elsevier.

The factor-label method in 5 steps

Dimensional analysis (also called the factor-label method) lines up units so the unwanted ones cancel. A unit conversion such as 1000 mg over 1 g represents the same amount on top and bottom. A label factor, such as 5 mL over 125 mg, connects the drug amount to the volume on hand. It is one standard method taught in introductory nursing math.

  1. Write the answer unit first. Before any numbers, write what you are solving for: tablets, mL, mg, mL/hr or gtt/min.
  2. Start with the order. Put the ordered amount (the "desired" dose) as your starting number, with its unit.
  3. Add conversion factors. Each factor is a fraction that equals 1. Flip it so the unit you want to get rid of is on the bottom.
  4. Add the "on hand" factor. What is available goes in as a fraction too, like 5 mL over 125 mg, with the unit you want on top.
  5. Cancel, then compute. Cross out matching units on the top and bottom. If what is left is not the unit from step 1, a factor is upside down. Then multiply across the top, divide by the bottom, and round once at the end.

Here is what a setup looks like. The question: you need 250 mg and the bottle says 125 mg per 5 mL.

250 mg 5 mL125 mg 10 mL

mg is on top once and on the bottom once, so it cancels. mL is the only unit left, which is what the question wanted.

The only conversions you need here

These are the links that keep showing up in dosage-style problems. For metric prefixes in general, inches, cups and the rest, see the unit conversions guide.

Conversion factors used on this page
LinkFactor (either way up)Sanity check
grams and milligrams1 g = 1000 mgg to mg: number gets 1000 times bigger
milligrams and micrograms1 mg = 1000 mcgmcg is the tiny one: mcg numbers are bigger
liters and milliliters1 L = 1000 mLa 1 L bag is 1000 mL
kilograms and pounds1 kg ≈ 2.2 lb (use 2.2 in these problems)kg number is always smaller than lb number
hours and minutes1 hr = 60 mingtt/min problems almost always need this
drop factor (given in the problem)for example 15 gtt = 1 mLprinted on the tubing; the problem will tell you

Ratio and proportion as a check. For one-step problems you can also set two ratios equal: 125 mg is to 5 mL as 250 mg is to x mL, so 125x = 1250 and x = 10. If dimensional analysis and a proportion give different answers, one setup is wrong. Find it before you move on.

Three worked problems

Worked problem 1: grams ordered, mg/mL on hand (two factors)

Problem. The order is 0.25 g of a liquid medicine. The bottle reads 125 mg per 5 mL. How many mL?

Answer unit: mL. Start: 0.25 g. The order is in grams but the bottle is in mg, so you need a g-to-mg factor first.

0.25 g 1000 mg1 g 5 mL125 mg 10 mL

Compute. Top: 0.25 × 1000 × 5 = 1250. Bottom: 1 × 125 = 125. 1250 ÷ 125 = 10 mL.

Check with a proportion. 0.25 g = 250 mg. 125 mg : 5 mL = 250 mg : x mL, so x = 250 × 5 ÷ 125 = 10. Also, 250 mg is exactly twice 125 mg, so you need twice 5 mL. Same answer.

Worked problem 2: weight in pounds, dose per day split into doses

Problem. A practice order reads 4 mg/kg/day, given in 2 equal doses. The patient weighs 154 lb. How many mg is each dose?

Answer unit: mg per dose. Notice two things: the weight is in pounds but the order is per kilogram, and the order is per day but the question asks per dose.

154 lb 1 kg2.2 lb 4 mgkg · day 1 day2 doses 140 mg/dose

Compute in pieces. 154 ÷ 2.2 = 70 kg. 70 kg × 4 mg/kg = 280 mg per day. 280 ÷ 2 = 140 mg per dose.

Check the direction of 2.2. 70 kg is less than 154 lb, which is right because a kilogram is heavier than a pound. If you had multiplied (154 × 2.2 = 338.8 "kg"), the dose would be 4.84 times too big. And if you stopped at 280 mg, you would have answered the per-day question, not the per-dose one.

Worked problem 3: IV rate in mL/hr, gtt/min, and time

Problem. 1500 mL of IV fluid is to run over 12 hours. The tubing drop factor is 20 gtt/mL. (a) What is the rate in mL/hr? (b) What is the rate in gtt/min, to the nearest whole drop? (c) At the same mL/hr rate, how long would 250 mL take?

(a) mL/hr. Volume over time.

1500 mL12 hr 125 mL/hr

(b) gtt/min. Now the answer unit is drops on top and minutes on the bottom. Bring in the drop factor and change hours to minutes.

1500 mL12 hr 20 gtt1 mL 1 hr60 min 41.67 → 42 gtt/min

Top: 1500 × 20 × 1 = 30,000. Bottom: 12 × 1 × 60 = 720. 30,000 ÷ 720 = 41.666…, and you cannot count part of a drop, so 42 gtt/min.

(c) Time. Flip the rate so mL cancels and hours are left.

250 mL 1 hr125 mL 2 hr

Check. 125 mL/hr × 12 hr = 1500 mL, so part (a) is right. Shortcut for (b): mL/hr × drop factor ÷ 60 = 125 × 20 ÷ 60 = 41.67. Same thing, just with the factors already multiplied.

Want more math like this? The NursingDrill course has lessons and practice for TEAS 7 and HESI A2 math, reading, science and English.

Start your free 2 weeks

Full access, no card needed.

Rounding: follow the problem

Traps that cost points

Starting with the wrong number
Start with the order (what is wanted), not the strength on the label. The label goes in as a factor. If you start with the label, you usually end with the reciprocal.
Desired unit not where it should be
The unit you want must end up on top (or on the bottom for "per minute" rates), not cancelled away. Write the answer unit before anything else and check against it at the end.
Mixing mg and mcg
0.25 mg is 250 mcg, not 0.25 mcg. If the order and the label use different units, a conversion factor is required. Forgetting it is off by a factor of 1000.
Using 2.2 the wrong direction
Pounds ÷ 2.2 = kilograms. Do not confuse lb and kg: if your kg number is bigger than the lb number, you multiplied.
Leaving out the drop factor
mL/hr does not need a drop factor. gtt/min does. If a gtt/min answer looks like a mL/hr answer divided by 60, you skipped the gtt/mL factor.
Per dose versus per day
"mg/kg/day in 3 divided doses" means find the daily total, then divide by 3. Read the last line of the question to see which one it wants.

15 practice problems

Type a number only. The unit is printed next to each box. Press Enter or the Check button. Round as the problem asks. Answers within 0.001 of the rounded key are accepted for typing precision. If your math is right but the rounding is not, the feedback will tell you.

Every problem has a full factor-label solution under "Show the worked solution". It works without JavaScript too.

Work each problem, then open its worked solution to check your setup.

1. Tablets, one step tablet

The order is 150 mg. Tablets on hand are 50 mg each. How many tablets?

Show the worked solution
150 mg1 tab50 mg3 tablets

150 ÷ 50 = 3. Check: 3 tablets × 50 mg = 150 mg.

2. Liquid, one step liquid

The order is 375 mg. The oral liquid on hand is 125 mg per 5 mL. How many mL?

Show the worked solution
375 mg5 mL125 mg15 mL

375 × 5 = 1875. 1875 ÷ 125 = 15 mL. Proportion check: 125 mg : 5 mL = 375 mg : x, so x = 15.

3. Liquid, nearest tenth liquid

The order is 35 mg. The vial on hand is 50 mg per 2 mL. How many mL? Round to the nearest tenth.

Show the worked solution
35 mg2 mL50 mg1.4 mL

35 × 2 = 70. 70 ÷ 50 = 1.4 mL. Already to the tenth. Sanity check: 35 mg is less than 50 mg, so the answer should be less than 2 mL.

4. Grams to tablets, two factors multi-step

The order is 0.75 g. Scored tablets on hand are 500 mg each. How many tablets?

Show the worked solution
0.75 g1000 mg1 g1 tab500 mg1.5 tablets

0.75 × 1000 = 750 mg. 750 ÷ 500 = 1.5 tablets (one and a half scored tablets).

5. mg ordered, mcg/mL on hand multi-step

The order is 0.125 mg. The liquid on hand is 250 mcg per mL. How many mL?

Show the worked solution
0.125 mg1000 mcg1 mg1 mL250 mcg0.5 mL

0.125 × 1000 = 125 mcg. 125 ÷ 250 = 0.5 mL. Written with a leading zero: 0.5 mL.

6. mg/kg, weight in kg weight-based

A practice order is 15 mg/kg. The patient weighs 40 kg. How many mg?

Show the worked solution
40 kg15 mg1 kg600 mg

40 × 15 = 600 mg. The weight is already in kg, so no conversion.

7. mg/kg, weight in pounds weight-based

A practice order is 10 mg/kg. The patient weighs 66 lb. How many mg?

Show the worked solution
66 lb1 kg2.2 lb10 mg1 kg300 mg

66 ÷ 2.2 = 30 kg. 30 × 10 = 300 mg.

8. Per day versus per dose weight-based

A practice order is 30 mg/kg/day in 3 equal doses. The patient weighs 44 lb. How many mg per dose?

Show the worked solution
44 lb1 kg2.2 lb30 mgkg · day1 day3 doses200 mg/dose

44 ÷ 2.2 = 20 kg. 20 × 30 = 600 mg per day. 600 ÷ 3 = 200 mg per dose.

9. mcg/kg, answer in mg unit trap

A practice order is 5 mcg/kg. The patient weighs 70 kg. How many mg is that?

Show the worked solution
70 kg5 mcg1 kg1 mg1000 mcg0.35 mg

70 × 5 = 350 mcg. 350 ÷ 1000 = 0.35 mg.

10. mg order, mcg tablets unit trap

The order is 0.25 mg. Tablets on hand are 125 mcg each. How many tablets?

Show the worked solution
0.25 mg1000 mcg1 mg1 tab125 mcg2 tablets

0.25 × 1000 = 250 mcg. 250 ÷ 125 = 2 tablets.

11. Pounds or kilograms? unit trap

A practice order is 2 mg/kg. The chart lists the weight as 88 lb. How many mg?

Show the worked solution
88 lb1 kg2.2 lb2 mg1 kg80 mg

88 ÷ 2.2 = 40 kg. 40 × 2 = 80 mg. Check: 40 kg is smaller than 88 lb, as it should be.

12. IV rate in mL/hr IV rate

1000 mL is to run over 8 hours. What is the rate in mL/hr?

Show the worked solution
1000 mL8 hr125 mL/hr

1000 ÷ 8 = 125 mL/hr. No drop factor needed for mL/hr.

13. IV rate in gtt/min IV rate

1000 mL is to run over 8 hours. The drop factor is 15 gtt/mL. What is the rate in gtt/min, to the nearest whole drop?

Show the worked solution
1000 mL8 hr15 gtt1 mL1 hr60 min31.25 → 31 gtt/min

Top: 1000 × 15 = 15,000. Bottom: 8 × 60 = 480. 15,000 ÷ 480 = 31.25, which rounds to 31 gtt/min.

14. Short infusion in gtt/min IV rate

100 mL is to run over 30 minutes. The drop factor is 20 gtt/mL. What is the rate in gtt/min, to the nearest whole drop?

Show the worked solution
100 mL30 min20 gtt1 mL66.67 → 67 gtt/min

100 × 20 = 2000. 2000 ÷ 30 = 66.666…, which rounds to 67 gtt/min. The time is already in minutes, so no hour factor.

15. Infusion time time

750 mL is running at 100 mL/hr. How many hours will it take? Give a decimal number of hours.

Show the worked solution
750 mL1 hr100 mL7.5 hr

750 ÷ 100 = 7.5 hours, which is 7 hours 30 minutes (0.5 hr × 60 min/hr = 30 min).

Keep going with exam math. Lessons, practice questions and flashcards for TEAS 7 and HESI A2.

Start your free 2 weeks

Full access, no card needed.

Practice a free chapter

Questions students ask

Is dosage calculation on the TEAS or the HESI A2?

Neither exam is a nursing pharmacology test, but both test the math underneath it: ratios, proportions, unit conversions and measurement. Medication-style problems let you practice those skills. Check your own program's exam guide for what is in scope.

Should I use dimensional analysis or ratio and proportion?

Either works if you set it up right. Dimensional analysis is easier to keep straight when a problem needs more than one conversion, because every unit has to cancel. Ratio and proportion is a fast way to check a one-step answer.

Which way does 2.2 go when converting pounds to kilograms?

Divide pounds by 2.2 to get kilograms. A kilogram is heavier than a pound, so the number of kilograms is always smaller than the number of pounds. Write it as a factor with 1 kg on top and 2.2 lb on the bottom so lb cancels.

When do I round in a dosage problem?

Round once, at the end, to whatever the problem tells you, such as the nearest tenth of a mL or a whole number of drops per minute. Rounding in the middle can push the final answer off.

Can I use this page to work out a real dose?

No. Every number here is made up for exam math practice. This is study practice only, not a dosing reference or medical advice. Real medication doses come from a prescriber, the drug label and your facility's policies.

Sources

Methods (dimensional analysis, ratio and proportion, lb to kg, IV rate setup) follow standard introductory nursing math as taught in these open textbooks. Every answer on this page was recomputed independently.

Share image: original NursingDrill text card, CC0 1.0.

NursingDrill is independent practice. It is not affiliated with or endorsed by ATI. TEAS is a trademark of Assessment Technologies Institute, L.L.C. NursingDrill is not affiliated with ATI, the TEAS exam, HESI, Elsevier, NCSBN, or the NCLEX. HESI is a trademark of Elsevier. NursingDrill is not endorsed by Elsevier. Study practice only, not a dosing reference or medical advice.

Study chapters · All guides · Privacy · Terms · Disclaimer